Operating specifications Technical specifications
External Dimensions Advantages
• Dedicated to sub-micron analysis.
• Used extensively in quality control, where a variety of different powders are analyzed.
The CILAS 1064 has been designed for performance and reliability. You will be very pleased with your investment. Each component has been selected not only for its reliability and robustness, but also for its ease of replacement.
Movable mechanical parts and exposed optical components have been deliberately eliminated.

Selected fields of application :
• CaCO3, pigments, seaweed,
• metallic alloys, pharmaceuticals,
• ... 
           
       

 
Operating specifications      
Range :
• Liquid mode : 0.04 - 500 mm
• Dry mode : 0.3 - 500 mm
• Dispersion type : Venturi
(Dry mode)		 Amount of sample required :
• Liquid mode < 5 g
• Dry mode < 20 g		 Repeatability : 0.5 %

Reproducibility : < 2 %

 Acquisition time :
• Liquid mode --> 30 seconds
• Dry mode --> 15 seconds
Technical specifications    
Number of lasers : 2

Fiber and collimated laser diode :
• wavelength : 635 and 830 nm
• total power : 7 mW
• beam diameter : 2 and 20 mm

Detection system :
Custom silicon detector

 Peristaltic pumps :
typical 120 rpm (adjustable from 0 to 300 rpm)

Mechanical stirrer :
adjustable from 0 to 300 rpm

Ultrasonic :
• continuous or pulsed
• adjustable power 20, 35 or 50 W

 Manufacturing :
ISO 9001 registered

Software :
"The Particle Expert", Windowsô compatible

Electrical requirements :
• 110/240 V
• 50/60 Hz
• power < 100 VA
External Dimensions      
• Length : 830 mm (33 in.) • Width : 560 mm (22 in.) • Height : 480 mm (19 in.) • Weight : approx. 50 kg (110 lbs)
CILAS 1064 - Unique advantages •  
No need to realign
There is no need to readjust the system, because all optical components are rigidly aligned and mounted on a short cast iron bench ensuring the original factory performance.
 
 

An integrated dispersion system
Its efficient and powerful dispersion system avoids the use of external accessories.

   Exceptionnal reliability
Movable mechanical parts and exposed optical components have been deliberately eliminated. Its one-piece design and its robustness provide for repeatable and operator-independent results. The CILAS 1064 can be used for intensive measurements in aggressive industrial environments.

Liquid to dry mode change in 1 second
The transition from liquid to dry mode is accomplished in the software without any hardware changes by the operator.

 
All the informations and the specifications of the particle size analyzers are subject to change without notice by CILAS.